Recent content by Clutch

The #1 community for Gun Owners of the Northeast

Member Benefits:

  • No ad networks!
  • Discuss all aspects of firearm ownership
  • Discuss anti-gun legislation
  • Buy, sell, and trade in the classified section
  • Chat with Local gun shops, ranges, trainers & other businesses
  • Discover free outdoor shooting areas
  • View up to date on firearm-related events
  • Share photos & video with other members
  • ...and so much more!

    • Register Log in
    1. Clutch

      Feedback posted by Clutch on Sgt. Psycho

      Good guy to deal with. ...
      • Clutch
      • Classifieds feedback
    2. Clutch

      Convert a Century Arms C39 into a C39 Micro?

      Assuming the C39 you are starting with is a pistol there is no legislation that I am aware of, state or federal, that restricts you from shortening the barrel or replacing the barrel with a shorter one. I'm not familiar with the CAI C39's. One search I did produced a link to a rifle at...
    3. Clutch

      Finally built out a pre 2013

      Ha ha, this thread. Hilarious. Nice work fellas. Looks great.
    4. Clutch

      Trust Attorney?

      Under last year's regulation change does just the RP need finger print and photo for new (post 7/16) NFA item applications or does the Successor (or Beneficiary) also need to submit prints and photo on any new trust items? I was told "everyone on the trust" must do photo and print.
    5. Clutch

      AK47 receiver to AMD-65

      I just did one. Cut the notch for the hinge, drilled the rivet and bottom holes as well. The hinge notch I marked off of the hinge location when inserted into the receiver, up to contact. I did the cuts with a dremel wheel and grinder bit on the conservative side, then file to fit. Works well.
    6. Clutch

      Building a vz58 parts kit on ORF receiver

      I have. That's a good tutorial. I just skimmed it but it mentions a half of a thousandth interference/press fit (.0005"). That is not much at all. The critical factor is supporting the receiver/trunion. That is a must. The listed tool is ideal but you could probably fabricate something to...
    7. Clutch

      Steel Target at AGC

      Will do Petar. Thanks for the pointer.
    8. Clutch

      OMG!, Legend prices

      Wow, on that Legend. Very nice. I'd keep all 3. Especially the Legend
    9. Clutch

      How to get more AK74s approved by MDSP?

      Touche, Jimbob
    10. Clutch

      Steel Target at AGC

      This is awesome. As is the video. Thanks for sharing. I'd like to try steel at AGC. Is that your steel or one that AGC has set up?
    11. Clutch

      Building a vz58 parts kit on ORF receiver

      I have a press and could help press the barrel into the receiver and possibly help with headspace. But, I've never built a VZ so could only help try and figure it out. I have a VZ for reference as well. I'm not a gunsmith either, I should add.
    12. Clutch

      Tree Removal

      For trees I'm not wanting to do myself, I use Arundel Tree Service. They've done over a dozen trees for me. Good prices. They have a boom/bucket truck as well as the standard chippers and will also climb and cut, etc.
    13. Clutch

      so excited

      That wood furniture looks great dohc97. I might have to look into finding something similar for mine. Thanks for sharing it.
    14. Clutch

      How to get more AK74s approved by MDSP?

      Dammit. I'd have jumped on that had I gone. :envy:
    15. Clutch

      How to get more AK74s approved by MDSP?

      That's a beaut, Dan44
    See more
    Top Bottom