Archeryrob
Undecided on a great many things
I have done some playing around and likes using the Durofelt punched to 9/16" lubed in beeswax and deer lard mixed 50/50. The gas seal has given me consistance flight with the lee REAL 250's. What I did not like what using a hammer punch to cut the 9/16" wads.
Anyone familiar with a disc cutter I could use in the drill press or drill driver to cut these discs out. Once I cut a few the wood under it gets dented and these it doesn't cut all over. Looking for a better solution for cutting wads without buying reloading press!! Next was buying a 9/16" hole saw and filing the teeth off and the inside to leave the outside as a cutting knife. It seems an extreme measure from something that might already be made.
An ideas?
Anyone familiar with a disc cutter I could use in the drill press or drill driver to cut these discs out. Once I cut a few the wood under it gets dented and these it doesn't cut all over. Looking for a better solution for cutting wads without buying reloading press!! Next was buying a 9/16" hole saw and filing the teeth off and the inside to leave the outside as a cutting knife. It seems an extreme measure from something that might already be made.
An ideas?