PCC Sub Gun Omnibus Thread

rbird7282 · Mar 8, 2020

outrider58 said:
Build baby, build!

Already did.
CMMG radial delayed blowback bolt/16” barrel combo
Built the rest.
Engage lower
9mm stripped upper
BCM KMR 15” rail
Geissele B-GRF trigger
9mm compensator (forget the brand)
CMMG 9mm AR conversion mags
Bushnell TRS-25 red dot (poached from my .22 AR upper. Eventually this will be replaced but it’s fine for now

Very soft shooting. Shot a Steel Challenge match with it at AGC last weekend, it was awesome

Sent from my iPhone using Tapatalk

rockstarr · Mar 9, 2020

teratos said:
Who needs a PCC that doesn't like subs?

After reading a bit more. It was some flat nose rounds that jollylama’s didn’t like. Apparently round nose stuff is good to go.

I’ll see when I get mine as I have a whole slew of different 9mm I plan to run in it.

rockstarr · Mar 9, 2020

rbird7282 said:
Already did.
CMMG radial delayed blowback bolt/16” barrel combo
Built the rest.
Engage lower
9mm stripped upper
Geissele B-GRF trigger
9mm compensator (forget the brand)
CMMG 9mm AR conversion mags
Bushnell TRS-25 red dot (poached from my .22 AR upper. Eventually this will be replaced but it’s fine for now

Very soft shooting. Shot a Steel Challenge match with it at AGC last weekend, it was awesome

Sent from my iPhone using Tapatalk

Do we even wanna know what that cost ? Lol cmmg is uber pricey for what they sell imo.

rockstarr · Mar 9, 2020

outrider58 said:
Build baby, build!

Those braces are awesome and super pretty, but darn are they expensive.

rbird7282 · Mar 9, 2020

rockstarr said:
Do we even wanna know what that cost ? Lol cmmg is uber pricey for what they sell imo.

The barrel bolt combo was $330.
Yes their stuff is pricey but it shoots great and I didn’t need a 9mm lower, I used an existing AR15 lower that I had already built. Their conversion mags work really well. Zero malfunctions after 400 rounds
I could’ve probably built the whole upper for $550 but had specific parts that I wanted to use. The rail was $200 but I could’ve cut that in half with a cheaper one.

Sent from my iPhone using Tapatalk

outrider58 · Mar 9, 2020

rbird7282 said:
The barrel bolt combo was $330.
Yes their stuff is pricey but it shoots great and I didn’t need a 9mm lower, I used an existing AR15 lower that I had already built. Their conversion mags work really well. Zero malfunctions after 400 rounds
I could’ve probably built the whole upper for $550 but had specific parts that I wanted to use. The rail was $200 but I could’ve cut that in half with a cheaper one.

Sent from my iPhone using Tapatalk

Now that right there makes it worth the money! I absolutely hate Glock lowers.

Damn you rbird!

Devonian · Mar 10, 2020

Has anyone built an upper using the 9mm CMMG radial bolt/barrel and a standard AR upper? Website says you need an oversized ejection port for reliable extraction. Just wondering how much of an issue it is.

teratos · Mar 10, 2020

Devonian said:
Has anyone built an upper using the 9mm CMMG radial bolt/barrel and a standard AR upper? Website says you need an oversized ejection port for reliable extraction. Just wondering how much of an issue it is.

I have mine on a RRA 9mm upper. No problems. Not sure if the port is oversized, it does have the 9mm shell deflector thingy.

rbird7282 · Mar 10, 2020

Devonian said:
Has anyone built an upper using the 9mm CMMG radial bolt/barrel and a standard AR upper? Website says you need an oversized ejection port for reliable extraction. Just wondering how much of an issue it is.

Not sure but I just bought a stripped 9mm upper. No forward assist (don’t need it and can’t use it anyway) or dust cover.

I think it was $50.

Devonian · Mar 10, 2020

teratos said:
I have mine on a RRA 9mm upper. No problems. Not sure if the port is oversized, it does have the 9mm shell deflector thingy.

Excellent, thanks!

rockstarr · Mar 10, 2020

rbird7282 said:
The barrel bolt combo was $330.
Yes their stuff is pricey but it shoots great and I didn’t need a 9mm lower, I used an existing AR15 lower that I had already built. Their conversion mags work really well. Zero malfunctions after 400 rounds
I could’ve probably built the whole upper for $550 but had specific parts that I wanted to use. The rail was $200 but I could’ve cut that in half with a cheaper one.

Sent from my iPhone using Tapatalk

I agree- they do make nice stuff. Just pricey imo.

rbird7282 · Mar 10, 2020

rockstarr said:
I agree- they do make nice stuff. Just pricey imo.

Pricey indeed but I haven’t had to screw with different buffers/springs/bolts to get my 9mm to work properly. Flawless out of the gate

Sent from my iPhone using Tapatalk

teratos · Mar 10, 2020

The CMMG BCG/barrel really isn’t bad compared to other quality BCG/barrel combinations.

sead0nkey · Mar 11, 2020

I posted this up thread before the tailhook was added. My 13yo love this thing.

Jollyllama · Mar 12, 2020

rockstarr said:
So the general consensus is the stribogs like any 115-124 grain ball ammo but nothing else?

I finally broke down and bought one, Dan at Baltimore best pawn had some for a nice deal.

I can’t pick up until next week but I was hoping this thing isn’t a picky little Hooker to shoot.

I’m already looking at after market parts lol.

My Bog loves subs! They just have to be round nose. It doesn’t like any hollow points. Suppressed very well. Runs seller and bellot 150gr. No problem.

I suggest a three lug set up.

rockstarr · Mar 13, 2020

Jollyllama said:
My Bog loves subs! They just have to be round nose. It doesn’t like any hollow points. Suppressed very well. Runs seller and bellot 150gr. No problem.

I suggest a three lug set up.

my hope was to add a dead air wolfman in the future

probably have to stick with their mounting system or just direct thread it on the bog and leave it there.

John from MD · Mar 13, 2020

Has anyone added a law folding bracket to a AR type PCC? I am thinking about putting one on my Banshee.

outrider58 · Mar 13, 2020

John from MD said:
Has anyone added a law folding bracket to a AR type PCC? I am thinking about putting one on my Banshee.

I did, but removed it when I went from a Blade to SB PDW.

John from MD · Mar 13, 2020

I assume you made the change as the SB PDW gave you the length that you were happy with. I currently have the CMMG Rip Brace on mine and usually use it fully extended. By adding the LAW folder, I can just shorten the stock and still have a good length. Did you have any issues with the LAW unit?

TIA

Devonian · Mar 13, 2020

Waiting on the barrel and bolt but almost done.

PCC Sub Gun Omnibus Thread

The #1 community for Gun Owners of the Northeast

Member Benefits:

Ultimate Member

Major Deplorable

Major Deplorable

Major Deplorable

Ultimate Member

Eats Bacon Raw

Ultimate Member

My hair is amazing

Ultimate Member

Ultimate Member

Major Deplorable

Ultimate Member

My hair is amazing

Señor member

Ultimate Member

Major Deplorable

American Patriot

Eats Bacon Raw

American Patriot

Ultimate Member

Attachments

Users who are viewing this thread

Log in

Forum statistics