Thanks for the quick response. I have seen other say to used Medium as opposed to Low because of Clearances for the bolt vs scope. What would i lose/gain using either?For the price, IMO, these are hard to beat.
I'm assuming your scope has a 1 inch tube. The low 1 inch rings should fit the bill. Always get the lowest rings possible without causing clearance issues. I use the low rings on a 44mm objective, so I'd say it's a safe bet.
https://www.amazon.com/Warne-Scope-...YKBSY2RDJCZ&psc=1&refRID=RGNQR8BDFYKBSY2RDJCZ
Not the lightest since they are steel but will handle recoil without causing your scope to walk.
You may need to mount a weaver or pic rail though.