I’ve seen people do this on 10/22 with factory barrels. I think it was in rimfire porn web site
If this is the mod I'm thinking of, it has nothing to do with throat geometry.I’ve seen people do this on 10/22 with factory barrels. I think it was in rimfire porn web site
Has anyone shortened the chamber length on a precision 22 to reduce the freebore? Bought a barrel for my CZ 455 that they brought the tip of the bullet closer to the lands. Curious about the results if anyone has done it.
Has anyone shortened the chamber length on a precision 22 to reduce the freebore? Bought a barrel for my CZ 455 that they brought the tip of the bullet closer to the lands. Curious about the results if anyone has done it.
They cut the chamber end off a bit, machine the snout back to factory specs and put a match chamber inIf this is the mod I'm thinking of, it has nothing to do with throat geometry.
The 10/22 headspaces on the bolt face recess. The common practice is to mill off a small amount of the bolt face to reduce the depth of the recess and make headspace tighter. This is intended to improve consistency of ignition by reducing free-play between the case rim and bolt face recess, and thus doesn't affect the chamber length.
Yeah, i found some info on rimfire central as well about it. Figured I'd ask the group. If it doesn't spec our right I'll likely just need to order a whistlepig barrel.