Looking For 100 grain .223/.224 bullets- will pay

[Mr.Smalls]

Hello I am looking for any 100 grain .223/.224 bullets to send out to be made custom order or make a mold. I only need a few and will pay. But if you have a larger quantity of them, I would be interested in them as well. i would prefer jacketed but i will take molded as well.

 

[357Max]

Well there's these guys. http://www.outlawstatebullets.com/12.html

Why so heavy? You'll need 1/6.5 or 1/7 Twist min. 90gr is the heaviest readily available in several varieties depending on purpose.
95 SMK's have been out of stock for about 2 years.

90 SMK's are fairly cheap from RMR bullets.

.224 90 Gr. Sierra Match King Hollow Point Boat Tail Bullets *NEW* | RMR Bullets

These beautiful, sleek SMKs are the bullets to use for reaching out there with your Valkyrie, 22 Nosler, .22 Grendel, .22 Creedmoor, etc. Brand new factory firsts! These will not be loadable in .223 Rem/ 5.56 at magazine length but if you want to single feed them they will work. BC info: .563 @ 2080

www.rmrbullets.com

 

[Mr.Smalls]

Well there's these guys. http://www.outlawstatebullets.com/12.html

Why so heavy? You'll need 1/6.5 or 1/7 Twist min. 90gr is the heaviest readily available in several varieties depending on purpose.
95 SMK's have been out of stock for about 2 years.

90 SMK's are fairly cheap from RMR bullets.

.224 90 Gr. Sierra Match King Hollow Point Boat Tail Bullets *NEW* | RMR Bullets

These beautiful, sleek SMKs are the bullets to use for reaching out there with your Valkyrie, 22 Nosler, .22 Grendel, .22 Creedmoor, etc. Brand new factory firsts! These will not be loadable in .223 Rem/ 5.56 at magazine length but if you want to single feed them they will work. BC info: .563 @ 2080

www.rmrbullets.com

Thank you for your response. I'm already aware of th 90s and didn't know the 95s were o.o.s. for that long. I want to do some testing and play around with some loads. I put a 1 in 6 barrel on my 600 trail and see what it can do. I've contacted outlaw and have received no response. I think they've gone out of business.

 

[303_enfield]

NOE has some 100g molds in the catalogue. They also make custom molds.

Take a look:

.224 | NOE Bullet Moulds

noebulletmolds.com

 

[Mr.Smalls]

NOE has some 100g molds in the catalogue. They also make custom molds.

Take a look:

.224 | NOE Bullet Moulds

noebulletmolds.com

I was looking at them and i am going to buy the HTC226-100-FN-BN4. would you be able to tell me what top punch i should get for a lee press? it says Lyman or Saeco.