Brass trade thread.

[rickyp]

Does any have 50 to 100 winchester nickel Plated 9x19 brass?

6 rounds of 357 maximum brass. doesnt have to be great condition. I just want to test to see if my rcbs 357 mag dies can load the max round.

I am in laplata and go to Myrtle grove range quite often.

 

[Medusa Joe]

Does any have 50 to 100 winchester nickel Plated 9x19 brass?

6 rounds of 357 maximum brass. doesnt have to be great condition. I just want to test to see if my rcbs 357 mag dies can load the max round.

I am in laplata and go to Myrtle grove range quite often.

i can pass you 6ea 357 maximum brass next time i see you (our shop or gun show)

 

[LGood48]

Free for the asking as long as you'll pick them up!
.38 Special - 89 (GONE)
.357 Mag - 118 (GONE)
.44 Special - 24
.44 Mag - 50
These are all once fired brass. I don't own or reload for any of them.
I've deprimed and tumbled. Will need to be resized.
I live in Cecil county near Fair Hill. I'll drive as far as Molly's or to Chesapeake HD in Darlington to deliver.

 

[F-Stop]

Very generous. I could use the .38 and .357 if available. I can message to setup a place. Thanks!


Sent from my iPhone using Tapatalk

 

[Russ D]

Trade made

 

[F-Stop]

Free for the asking as long as you'll pick them up!
.38 Special - 89 (GONE)
.357 Mag - 118 (GONE)
.44 Special - 24
.44 Mag - 50
These are all once fired brass. I don't own or reload for any of them.
I've deprimed and tumbled. Will need to be resized.
I live in Cecil county near Fair Hill. I'll drive as far as Molly's or to Chesapeake HD in Darlington to deliver.

It was nice meeting you. Thanks again.


Sent from my iPhone using Tapatalk

 

[LGood48]

It was nice meeting you. Thanks again.


Sent from my iPhone using Tapatalk

My pleasure. Maybe we'll run into each other at SCCS&FA.

 

[dbledoc]

Looking for some unicorns: 6.5 Grendel or 6mm ARC brass
I have available for trade:
a large amount of 308/762 unprocessed brass with various head-stamps
A few Winchester/Federal 6.5 Creedmore brass
Hornday 6.5 Creedmore brass
Processed 30-06 brass (sized, swagged, trimmed) for an M1 Garand

 

[dbledoc]

I have a bag of once fired Hornady 6.5 Creedmore brass (>100), around 40 Winchester and 40 Federal as well. My rifle likes the Prime or Norma brand.
I am trying to make some space in my reloading area so they are free to whoever wants them. (I won’t say no to a trade (Norma or Prime 6.5 brass, 6.5 Grendel or 6mm ARC brass, but not really looking for anything in particular).
If no one claims them I am going to leave them in one of the buckets at the AGC to be recycled in 2 weeks.

 

[DaemonAssassin]

I have a bag of once fired Hornady 6.5 Creedmore brass (>100), around 40 Winchester and 40 Federal as well. My rifle likes the Prime or Norma brand.
I am trying to make some space in my reloading area so they are free to whoever wants them. (I won’t say no to a trade (Norma or Prime 6.5 brass, 6.5 Grendel or 6mm ARC brass, but not really looking for anything in particular).
If no one claims them I am going to leave them in one of the buckets at the AGC to be recycled in 2 weeks.

If nobody has claimed them, I'll take them.

 

[dbledoc]

If nobody has claimed them, I'll take them.

They are yours

 

[DaemonAssassin]

They are yours

Tried sending you a PM.

 

[Ray Savage]

I have 74 pieces of 308 federal brass, all shot once , never reloaded. Looking to trade for 22 250 or 6.5 creedmoor brass. If you don't need 308 brass I could do small or large rifle primers for once fired brass in good shape. Located in Washington county , willing to meet anywhere from frederick county to Garrett County. Texting is the fastest way to get me 2408760809, thanks Ray

 

[blazing lead]

I have 271 pieces of 7.62 x 39 brass case boxer primed, I'm looking to trade for .357 and or .38 spl brass. Anyone in Harford/ Cecil county that might be interested in a trade let me know.

 

[gungate]

Looking for 6.5 Grendel. Couple hundred would be nice.

 

[Squaregrouper]

Looking for 6.5 Grendel. Couple hundred would be nice.

This is probably going to be your best bet. Not many people shoot the Grendel and don't reload for it.
.

6.5 Grendel New Starline Brass

NEW Starline Brass, 6.5 Grendel Bags of 100 cases Unprimed, Small Rifle Primer Pockets This Is NOT Loaded Ammunition

www.druidhillarmory.com

 

[gungate]

This is probably going to be your best bet. Not many people shoot the Grendel and don't reload for it.
.

6.5 Grendel New Starline Brass

NEW Starline Brass, 6.5 Grendel Bags of 100 cases Unprimed, Small Rifle Primer Pockets This Is NOT Loaded Ammunition

www.druidhillarmory.com

Thanks! Ordering 200 now......

 

[Squaregrouper]

Thanks! Ordering 200 now......

Starline is now making 6mm ARC brass. That will help us out in the near future because a lot of Grendel brass has been bought for the sole purpose of being converted to ARC. Our own @dbledoc is guilty of this.

 

[gungate]

Starline is now making 6mm ARC brass. That will help us out in the near future because a lot of Grendel brass has been bought for the sole purpose of being converted to ARC. Our own @dbledoc is guilty of this.

Savages!

 

[4g64loser]

Starline is now making 6mm ARC brass. That will help us out in the near future because a lot of Grendel brass has been bought for the sole purpose of being converted to ARC. Our own @dbledoc is guilty of this.

Savages!

Hey now, don't hate on dbledoc for getting into basic brass forming. When you hear that my varmint shooting acquaintances make ALL of them into 22 ppc and 6 ppc you will really cry.

I like telling guys I made their creedmoor brass into 22-250ai.