Thanks Nick. A close call. I've seen a few exploding gun videos that didn't turn out so well.Glad you were not more seriously injured.
Think I will stick with my single stage press.
Thanks Nick. A close call. I've seen a few exploding gun videos that didn't turn out so well.Glad you were not more seriously injured.
Think I will stick with my single stage press.
Yes. In a progressive type press, if you have an empty squib(no powder at all) it is likely you'll have a double charged cartridge. One usually follows the other and is usually(in my case) because there was a reason for me to stop and fix some form of malfunction in the process.
There are also weak powder charges due to different reasons that will not lead to a double charge like, you ran out of powder in the hopper, or some other thing cause the powder dump to not be adequate. Bugs, lint, foreign objects, bridging, all could cause in incomplete charge.
This is the very reason why I am so reluctant to sell or give away from my possession any reloaded ammunition. Its not enough even after triple checking to make double sure that all of my loads are safe. What happens when you pass your reloaded stuff off to another is that it teaches the recipient that its ok to take reloads from another. Its bad practice to do it. I cannot guarantee quality assurance with the next guy.4g Tite Group(in this case, that would be 8g)
As soon as I got home, I tried to double load a cartridge(with a spent primer in it) and even though the case was nearly filled, it compressed right down when I seated the bullet.
I'm going to change my system a bit now. This was a first double load out of tens of thousands of rounds.
I did suffer a squib 300 Blk sub once with no harm done.
That has been my bane as well. So much so, that I've gone back to hand priming my rifle cartridges(.223). I'm going to do that with my pistol calibers also.With me it is usually a primer misfeed.
Glad you are ok. Scary stuff.
This is the very reason why I am so reluctant to sell or give away from my possession any reloaded ammunition. Its not enough even after triple checking to make double sure that all of my loads are safe. What happens when you pass your reloaded stuff off to another is that it teaches the recipient that its ok to take reloads from another. Its bad practice to do it. I cannot guarantee quality assurance with the next guy.
OP. I am glad that you are OK and that you didn't wind up with a worse injury than you did. I appreciate your courage to post this in an open forum for the betterment of the rest of us. Its easier to live your mistake down than lose a finger or a hand or even an eye and have to live with that.
this is what i do also , hand prime and then load .That has been my bane as well. So much so, that I've gone back to hand priming my rifle cartridges(.223). I'm going to do that with my pistol calibers also.
That has been my bane as well. So much so, that I've gone back to hand priming my rifle cartridges(.223). I'm going to do that with my pistol calibers also.
When I first began reloading, I actually had an RCBS hand primer blow up in my hand. I had a primer hang up on a .223 primer crimp. I backed off, not realizing the thing had picked up a second primer. As I tried forcing the stuck primer in, both detonated in my face.this is what i do also , hand prime and then load .
lol , i know ! always pay attention when priming also !When I first began reloading, I actually had an RCBS hand primer blow up in my hand. I had a primer hang up on a .223 primer crimp. I backed off, not realizing the thing had picked up a second primer. As I tried forcing the stuck primer in, both detonated in my face.
I thought, maybe I should just quit this hobby and take up knitting or something, but you know, those knitting needles can be dangerous as too!