fleaman64
Ultimate Member
- May 12, 2011
- 1,367
Interested.
You're late to the party. These were sold last fall and members are now picking them up...
Last edited:
Interested.
How much is stamp
How much is stamp
$200
REASSEMBLY:
A small amount of "Never Seize" or "No Seize" (which is used on automobile exhaust manifold bolts and is available at any auto parts store) on the endcap OD threads, will facilitate future disassembly. To assemble, screw the rear cap (1/2x28 hole in it) on to the tube first, paying attention to orient the lettering on the tube correctly. Use the driver tool that is still in the vice to hand tighten the rear cap as tightly as you can get it by hand. DO NOT use the strap wrench or any other tools. Insert the baffles from the front of the can with the flat surface first and the cone second (the bullet goes through the flat part of the baffle first), spiraling the baffles every 90 degrees as you put them in. Screw on the front cap and use the same driver in the vice to HAND torque it. You should have tight baffle compression between the caps and there should be between 0.000 and 0.004 gap between the tube and the front cap (about the thickness of a piece of paper). If there is more than that, the baffles are not clean and the dirt is making them longer and / or you need to HAND torque the front cap a little more. Visually verify that the bullet path through the suppressor is unobstructed. Shoot 3-5 rounds to compress the baffle stack and then retorque the cap.
Uh, for NFA items a 6-month wait is standard operating procedure. Wouldn't want you to get those ter'rist devices before you've had enough time to contemplate the evil of your ways.6 month mark has passed the wait is unconscionable.
You're new here, so Protip: Read group buy threads completely and note the dates. This closed a long, long time ago.Im interested.