Second Build (AR-15)

[TROOPER]

Okay guys, just starting another thread for my next AR-15 build.

Here's a link for my first build thread (AR-15 SPR 18"):
http://www.mdshooters.com/showthread.php?t=61008

I'll post pics as the build progresses....

Just waiting on paperwork for my lower receiver, so I should be picking that up by Wednesday.
And still waiting for gas tube, so I'll be starting the build real soon hopefully

Here's my curent build list for my new AR-15 14.5"

Current Build List:

Lower:
Rock River Arms - Stripped Lower
Rock River Arms - 2-Stage trigger kit
Rock River Arms - Winter Trigger Guard
Spikes 6-pos Milspec Carbine Buffer Kit
Mako (FAB Defense) Stock with Adjustable Cheek Riser
Magpul BAD (Battery Assist Device)
Suregrip ERGO Grip Kit, Black Right Hand

Upper:
Spikes - Upper Receiver Assembly
Spikes - Full Auto - Bolt Carrier Group (BCG)
Bravo Company - BCMGunFighter Charging Handle - Medium
YHM Low Profile Gas Block (slotted)
Spikes Mid-Length Gas Tube
YHM - Phantom Compensator
Midwest Industries - T-Series 12" Rail
Rainier Arms Select 5.56mm Barrel - 14.5" (mid-length)
MagPul AFG2 Foregrip

Misc:
Vortex StrikeFire Red Dot Scope
Magpul MBUS Gen 2 Front Back Up Iron Sight
Magpul MBUS Gen 2 Rear Back Up Iron Sight

Finished pic attached below:

 

[jawn]

Any reason why you're going with the Mako stock?

 

[TROOPER]

Any reason why you're going with the Mako stock?

Well I looked at a few, and the MAKO got some pretty good reviews.
It has build in storage, adjustable cheek support, and it's own built in recoil buffer, and looks pretty bad a$$

Not sure how good it's buffer is, not like 5.56 really has any recoil anyway.
But thought I'd check it out, instead of completely pimping out my AR in MagPul gear, like every other AR I've seen

 

[iHasCrabs]

Looks good, really like your first build too. Can't wait to see this one done. I'm glad I'm not the only one who just finished their first build and already planning the 2nd.

 

[JeepDriver]

Any reason you picked a YHM rail over the others ?

They work, but they are bulky.

 

[TROOPER]

Any reason you picked a YHM rail over the others ?

They work, but they are bulky.

It wasn't my first choice to be honest, but I was trying (somewhat) to stick to a budget.

It does have that impression that it's bulky, but they are all the same dimesions, or they wouldn't line up flush with the top of a flat top receiver..

My first choice at a fair budget would of been another Midwest Industries T-Series rail.

As for other parts on the build, the Magpul backup sights I have actually taken off of my SPR, for this build to save a few bucks.

 

[JeepDriver]

I understand the budget aspect and, as I said, the YHM rail works the same as all others.

They are the same height, however width is a different story.

DD ( M4 series, their widest version ) vs YHM :

I'm not bashing the choice, just over time I've owned a lot of FF rail/tubes and accessorys for the platform. From my time shooting with different systems I find I can get better control over the gun with a thinner handguard. Everyone is different though.

 

[jawn]

Well I looked at a few, and the MAKO got some pretty good reviews.
It has build in storage, adjustable cheek support, and it's own built in recoil buffer, and looks pretty bad a$$

Not sure how good it's buffer is, not like 5.56 really has any recoil anyway.
But thought I'd check it out, instead of completely pimping out my AR in MagPul gear, like every other AR I've seen

I've shot an SGL21 with a Mako recoil-reducing stock and I hated it. You just end up hearing the recoil buffer rattle around as you shoot. But, to each their own.

 

[TROOPER]

I've shot an SGL21 with a Mako recoil-reducing stock and I hated it. You just end up hearing the recoil buffer rattle around as you shoot. But, to each their own.

I'll see how it works out, but I hadn't heard of that issue before.

 

[TROOPER]

So I'm in the process of getting my barrel pinned, so no pics of the upper yet.

But here's a teaser shot of the lower parts, and my Red Dot.

Of course I had to include my awesome 18" SPR in the pic

Lower not complete, only screwed the stock on hand tight for the pics

 

[04RWon]

No doubt the yhm 's are wide. I have them on my 20", comparing them to dd or even my kac you can tell.

 

[Russ D]

So I'm in the process of getting my barrel pinned, so no pics of the upper yet.

But here's a teaser shot of the lower parts, and my Red Dot.

Of course I had to include my awesome 18" SPR in the pic

I love the backdrop. Rifle should be done by tomorrow.

 

[zombiehunter]

So I'm in the process of getting my barrel pinned, so no pics of the upper yet.

But here's a teaser shot of the lower parts, and my Red Dot.

Of course I had to include my awesome 18" SPR in the pic

I love the backdrop. Rifle should be done by tomorrow.

yeah...dude you've got a flag on the ground and you're stepping on it. Probably a time to turn it into the local VFW.

 

[TROOPER]

yeah...dude you've got a flag on the ground and you're stepping on it. Probably a time to turn it into the local VFW.

Well that's me embracing my new Country

At least I didn't use my British flag LOL

 

[TROOPER]

Here's the completed lower, thanks to Russ for doing the build.

Upper still at Scott's Gunsmithing getting pinned

 

[Ar1b3nz]

I think your rifle is going to look great, so far i like your build

 

[elitehome]

nice build

 

[sailskidrive]

What was the total price tag?

 

[Forest]

So I'm in the process of getting my barrel pinned, so no pics of the upper yet.

But here's a teaser shot of the lower parts, and my Red Dot.

Of course I had to include my awesome 18" SPR in the pic

Lower not complete, only screwed the stock on hand tight for the pics

You stepped on an American Flag?

 

[Forest]

(b) The flag should never touch anything beneath it, such as the ground, the floor, water, or merchandise.

US Flag Code