Sig P365 - Which Model Are You Carrying?

[John from MD]

Just added a magguts kit to one of the 12rd std mags for the x and I really like it. The extra pinky wrap is really helpful with my hands and the added baseplate thickness is insignificant. So it's a 14+1 now.

I need to run it a bit to be sure it's not going to hiccup, but I doubt it will. It really works well with the slight flare in the base of the grip on the WC grip module. Looks like they were made for each other.. lol

I have Magguts in all my small pistols. I have never had a problem with any and I keep them loaded full. They just came out with a +2 for the 15 rd mag recently.

 

[Arcamm]

The Crown emailed me permission to pickup my P365X this morning. I did. Thank you Maryland Elite Firearms.

Field strip, inspection, and lubrication done. Next is range time.

 

[Sticky]

I have Magguts in all my small pistols. I have never had a problem with any and I keep them loaded full. They just came out with a +2 for the 15 rd mag recently.

Yes, from what I've seen and heard from others they got the kinks worked out from some of the early ones and they have been reliable. I have a 15rd mag, but I don't normally carry it, though it's a good one to slip in my pocket as a backup if needed.

Congrats Arcamm! :cheers:

 

[John from MD]

Yes, from what I've seen and heard from others they got the kinks worked out from some of the early ones and they have been reliable. I have a 15rd mag, but I don't normally carry it, though it's a good one to slip in my pocket as a backup if needed.

Congrats Arcamm! :cheers:

I have a 15rd also and mostly use it for on the Range. After seeing what the gang banger was carrying, I may get a Magguts kit for it and take it with me when going to sketchy areas.

 

[E.Shell]

The Crown emailed me permission to pickup my P365X this morning. I did. Thank you Maryland Elite Firearms.

Field strip, inspection, and lubrication done. Next is range time.

Excellent!

 

[Phoenix_1295]

The Crown emailed me permission to pickup my P365X this morning. I did. Thank you Maryland Elite Firearms.

Field strip, inspection, and lubrication done. Next is range time.

MD Elite Firearms is a great place to do business. Everyone is friendly and knowledgeable.

 

[ironpony]

Thanks E Shell


I thought I might want an XL for some reason (have an X) and my niece just got her permit and says she really likes my little brown gun, ugh, lol so hmmm I never thought I’d want to sell a Glock until now. Or three.

Range @ 1:00 today!

 

[UNCLE PAULY]

I would like to buy the P365X, but where are you all purchasing them with the ten round mag limit?
Are local shops selling the P365X with 12 rnd mags converted to 10 rnd mags?
Does Sig Sauer produce MD compliant 10 rnd magazines that fit the P365X?
Can you purchase a P365X without any magazines?

 

[rbird7282]

I would like to buy the P365X, but where are you all purchasing them with the ten round mag limit?
Are local shops selling the P365X with 12 rnd mags converted to 10 rnd mags?
Can you purchase a P365X without any magazines?

What? Most FFL’s will simply pin the 12 round mags to 10 rounds.
When you get it, go to VA, WV, or PA and convert the mags back to 12 rounds.
Easy


Sent from my iPhone using Tapatalk

 

[Ammo Jon]

I would like to buy the P365X, but where are you all purchasing them with the ten round mag limit?
Are local shops selling the P365X with 12 rnd mags converted to 10 rnd mags?
Does Sig Sauer produce MD compliant 10 rnd magazines that fit the P365X?
Can you purchase a P365X without any magazines?

Go out of state and bring back whatever you like? If you’re going to carry 10 rounds better to just get the 365 and conceal easier.

 

[Sticky]

Sig makes a 10rd mag (dimpled) to fit the X, that's how mine came, 2 12rd mags that were limited to 10rds. I bought mine from a shop in Aberdeen.

 

[tjaw]

365, 365XL, 365X, 365SAS or 365 Macro?

I carry the P365. I acquired it for its small size and patented relatively high capacity.

 

[E.Shell]

I would like to buy the P365X, but where are you all purchasing them with the ten round mag limit?
Are local shops selling the P365X with 12 rnd mags converted to 10 rnd mags?
Does Sig Sauer produce MD compliant 10 rnd magazines that fit the P365X?
Can you purchase a P365X without any magazines?

Yes, Sig makes MD compliant 10 rounders for the X/XL guns, no need to buy w/o mags unless you order from out of state.

As Sticky says, they come with dimpled 12 rounders that are limited to 10 by the dimples. Everything else is the same as the factory 12 rounders and if the dimples fall out, the mags are actually 12 round and run fine.


ETA: ADDED PIC:
Left-to-right:
X/XL 10 round (note the limiting dimples)
X/XL 10 round - now 12 rounder (dimples fell out)
X/XL 12 round
X/XL 12 round with floor-plate adapter for P365
P365 10 round 'pinky mag'

 

[teratos]

The modularity is great. I can do any configuration with the x-macro slide I bought and a few grip modules. I still mostly carry my P365, but I haven’t had the x-Macro out to the range. Maybe tomorrow.

 

[Michigander08]

It's funny that Sig started with a small original P365. That what was the mission: small and capacity. Now people are crying for bigger versions!

 

[John from MD]

The only problem with Sig is that the make their magazine and striker assemblies out of Gold or Platinum.

 

[UNCLE PAULY]

So, after posting #188 above I spent time on Handgun Hero site comparing the P365, P365X and P365XL to pistols I already own.
Decided that the P365 was what I was originally looking for; a small 9mm to fit either front or rear pocket of jeans or cargo shorts.
Ran over to Bass Pro and after a long wait got to handle one in person. It's grip is small but manageable and disappears in front pants pocket.

P365 at Bass Pro for $500 +$30 tax. No cheaper online anywhere and then there would be shipping and FFL fees.
So now I can pick out a pocket holster and a few other extras while waiting the 7 days.

Thank you everyone for your inputs, Paul

 

[John from MD]

So, after posting #188 above I spent time on Handgun Hero site comparing the P365, P365X and P365XL to pistols I already own.
Decided that the P365 was what I was originally looking for; a small 9mm to fit either front or rear pocket of jeans or cargo shorts.
Ran over to Bass Pro and after a long wait got to handle one in person. It's grip is small but manageable and disappears in front pants pocket.

P365 at Bass Pro for $500 +$30 tax. No cheaper online anywhere and then there would be shipping and FFL fees.
So now I can pick out a pocket holster and a few other extras while waiting the 7 days.

Thank you everyone for your inputs, Paul

DeSantis has the Nemisis pocket hoster which I use when I carry mine in a jacket pocket.

 

[Michigander08]

 

[Michigander08]