No recommendations but the only MD restriction would be a 16” barrel unless it’s a pistol.Looking for upper including bcg. Also, what are MD restrictions- barrel length/hbar required?
Thanks!
I have first hand knowledge. 3 of the 6 I purchased had to be sent back for repairs, one of them multiple times eventually ending in a credit because I refused to keep wasting time with it. 50% success rate with a product is what gives you a bad rap.Just like anything you buy today someone can have a problem with something purchased. Yesterday I zeroed two BCA uppers. The first had a 223 wylde 20" ss barrel with a 1 in 8 twist. Zeroed a 5/8" group at 50' using a Swampfox Blade optic. Second was a 223 wylde 16" barrel with 1 in 8 twist. Zeroed a 3/4" group at 100' using Bushnell 3x9 . Ammo used was Norma 223 Tactical (about 200 rounds). No malfunctions.
Sometimes things get a bad rap just because they read it somewhere
Bought a 5.56 complete upper from them and after multiple attempts to develop a load for it, and experiencing blown primers using factory ammunition, it appears to have a very tight chamber causing extremely high pressures even with moderate charges. I have tried three powders normally used for this caliber with similar results.And why should you stay away from Bear Creek Arsonal?
But what if you see a deer wearing a Kevlar vest? I’d bet you want an AR platform then.BCA is garbage.
Buy a bolt action in .350. I've been very happy with my Ruger American.
I built a 350 using Palmetto 16 inch on top of Poly80 lower and it works fine.Looking for upper including bcg. Also, what are MD restrictions- barrel length/hbar required?
Thanks!