shootnfishndorf
Active Member
Added a drop of silicone a d hand pumped it up to 2k....now we wait...
Sent from my Armor 8 using Tapatalk
Sent from my Armor 8 using Tapatalk
It's probably the check valve in your fill. Remove the fill cover and pace a small balloon over the foster. If it fills up it's leaking there. You can also put a couple drops of liquid soap in a glass of water and mix it up. Dab a bit on the fitting and look for bubbles.
Easy fix. Degas, remove the poster fitting and replace the oring.
Is it really as simple as just degassing and unscrewing the foster? Anything else I need before trying it? Any teflon for the threads, loctite? As for the oring, is it one that I can match at the Lowes? I apologize for the list of questions. I do not want to take it apart and then realize I need more parts or hard to find items...I just checked the balloon, it does appear to have some air in it. The pressure gauge has lost maybe 200lbs...hard for these eyes to see those tiny marks...but it is below the 2K I pumped it to this morning. I could ignore it, pump it...shoot it...but something tells me, this situation will not improve. Airgun depot provided me with the tech support email, but if I can fix it myself, I'd rather not mail it in and wait, since it is out of warranty. I read a couple of other forums where others have described the same issue...just leaks down to 1k and then sits static.
Thank you. I will do some searching...should be easy enough...I will see if the tech support will give me a definite answer on size. Much appreciated.You will need teflon tape to put the foster back in.
I think most foster fills use a -006 oring. They may have them, may not. I do know that the Danco orings that lowes and HD carry do not use the same numbering system.
If you were up my way I'd do it for ya.
Much appreciated Sir. Let's see if they get back to me...in the mean time, I will get some shots in before Degrassing...I think most of the paintball folks use poly. I've got some in 70 buna and 90 buna (I think). One of my oring boxes fell off shelf and now I have a big pile of orings.
If you PM my your address I can put a coupe in an envelope and mail to ya. If they tell you a different size I likely have them too. Just let me know.
Not sure if it is showing up, but I tried attaching the parts schematic for the avenger. If it fails to load, I'm happy to email it directly. Just PM me.
Via email, Captain O-ring says they are coming out with an Avenger kit by the end of this month or September. They are having molds made, specifically for the 2.5 x 2.5mm o-ring.
Sent from my Armor 8 using Tapatalk
Here's the gun I was telling you about. (Can't attach them to PM so posted here)
It's 30" OAL. With the .30cal barrel it will shoot 80FPE. I've got it tuned to 31fpe in .22 right now.
I love it. It looks light and uncluttered and you have that great big bottle of air on it.
That is beautiful....I've been reviewing and researching the line of those.Here's the gun I was telling you about. (Can't attach them to PM so posted here)
It's 30" OAL. With the .30cal barrel it will shoot 80FPE. I've got it tuned to 31fpe in .22 right now.
Welcome. I've been hitting the site every other day ....it is eating away at me that my rifle is just a paperweight.....Thanks for the update.
Welcome. I've been hitting the site every other day ....it is eating away at me that my rifle is just a paperweight.....
Sent from my Armor 8 using Tapatalk