BigDaddy
Ultimate Member
- Feb 7, 2014
- 2,235
Is your feed ramp the same angle through out? One guy on one of the forums, used a dremel and made the angle the same, albeit steeper, and solved his hp probs. Another claimed his feed ramp was uneven left to right.
I also saw mention of the mag, being originally for the Witness. (don't know if true or not) but some people thought there was slop in their mags and they sat too low and drove the bullet into the steeper part of the feed ramp.
I'll bet if you called Dave at Cajun GW or CZ Custom, you would have a diagnosis in 30 sec. and a proposed cure. I would do that before I got out the dremel.
I also saw mention of the mag, being originally for the Witness. (don't know if true or not) but some people thought there was slop in their mags and they sat too low and drove the bullet into the steeper part of the feed ramp.
I'll bet if you called Dave at Cajun GW or CZ Custom, you would have a diagnosis in 30 sec. and a proposed cure. I would do that before I got out the dremel.