Collector98
Active Member
- Jan 18, 2015
- 272
I just ordered a bunch of reloading equipment and a lee pro 1000 and I just wanted to check the order of operations for prepping and loading with someone more experienced to be safe.
I ordered 1,500 once fired .223 cases and my plan is to:
1: remove primers using a universal decapper
2: run the lubed brass through a full length resizing die
3: trim the brass to the correct length
4: ream primer pocket to remove crimp
5: wet tumble with steel pins and lemishine
6: dry
7: add primer
8:add powder charge
9: seat bullet
Does everything sound correct and do I at least have a good starting point? I look forward to feedback from the more experienced!
I ordered 1,500 once fired .223 cases and my plan is to:
1: remove primers using a universal decapper
2: run the lubed brass through a full length resizing die
3: trim the brass to the correct length
4: ream primer pocket to remove crimp
5: wet tumble with steel pins and lemishine
6: dry
7: add primer
8:add powder charge
9: seat bullet
Does everything sound correct and do I at least have a good starting point? I look forward to feedback from the more experienced!