I use a Wheeler Fat Wrench and go by their recommendations as per screw size. No protection.Hey does anyone put protection between the scope rings and the scope? Does anyone torque the scope ring screws?
Amazon product ASIN B0012AXR4S
I use a Wheeler Fat Wrench and go by their recommendations as per screw size. No protection.Hey does anyone put protection between the scope rings and the scope? Does anyone torque the scope ring screws?
Any Hbar that has M4 feed ramps, which is probably 99.9% of them i production.
It is very easy to cut M4 feed ramps if you need to. You need a dremel, a medium grinding bit and a silicone polishing bit.
You don't need to buy mags, only mag followers. Swap them out for the standard AR 15 5.56 mag followers. Something like these:
(3) Pack 6.5 Grendel Anti-Tilt Followers
Our AR-15/M4/M16 followers are designed to not only look great, but give you even better performance. PTFE gives these followers a very strong coating that helps with lubricity and ensures a long lasting product. These are designed for use in ASC 6.5 Grendel magazines.www.ammosc.com
For almost twice as much, you can buy an Aero M4E1 Enhanced upper, but that doesn't come with a BCG nor a charging handle, so add another $200+ for those:
Aero Precision 20" 6.5 Grendel M4E1 Enhanced Complete Upper Assembly
Founded by a veteran, Wing Tactical finds the best tactical gun parts and accessories for AR-15s, Glocks, and other firearms so that you don’t have to.www.wingtactical.com
Aero Precision 6.5 Grendel/6mm ARC Bolt Carrier Group
Founded by a veteran, Wing Tactical finds the best tactical gun parts and accessories for AR-15s, Glocks, and other firearms so that you don’t have to.www.wingtactical.com
Seekins Precision DNA Charging Handle
Founded by a veteran, Wing Tactical finds the best tactical gun parts and accessories for AR-15s, Glocks, and other firearms so that you don’t have to.www.wingtactical.com
You'd end up with a solid upper with the Aero, but you'll pay a premium price too.
Side charging uppers are fine when they are reciprocting(charging handle isn't attached to the bolt carrier). When the charging handle is attached to the bolt carrier, they move with the bolt during firing. The problem is, in order to remove the bolt carrier for any reason, you will need to remove the handle with a tool. They also require a 'customized' bolt carrier that allows the mounting of said charging handle. So in the event you need to swap out the BCG if you are chasing down a problem or something, you can't just throw any ol' BCG into it.
Anyone know where I can get the Anti-Tilt Followers with free shipping? That site wants like $5 to ship them. I guess it is still fine if I can't find any place for free. I am finally moving on this Grendel build!
I'm interested in how well it shoots. I have a buddy who wants a 6.5GI got the below upper instead of the PSA since their site would not let me order and there is no way to contact them. It has already shipped. Very excited for it. It looks good and I found a lot of good reviews but also found some worse reviews. The bad reviews seem to focus on fit and finish. BSA guarantees it will shoot 1" groupings.
Once I get it I need to build another AR lower (I have 4 pre-ban left in my stash). I will use my Hera furniture. Debating to get a match style drop-in trigger. I have a couple AR lower build kits and never had an issue with standard triggers.
BTW: They don't charge tax or shipping so the price shown is the price you pay.
Since this is a long-range shooter I probably don't need backup iron sights but I have a set on the shelf. Who uses backup sights? Is it worth throwing them on?
BC-15 | 6.5 Grendel Upper | 20” 416R SS Straight Fluted Heavy Barrel | 1:8 Twist | Rifle Length Gas System | 15” MLOK
Shop BCA 6.5 Grendel Complete Uppers! All BCA grendels are type II and this upper features a stainless straight fluted barrel and the new handguard. You can't go wrong with BCA!www.bearcreekarsenal.com
Probably don't need backup sights. You know if I still had a pre-ban stripped upper I would build a retro-rifle. Just saying.I got the below upper instead of the PSA since their site would not let me order and there is no way to contact them. It has already shipped. Very excited for it. It looks good and I found a lot of good reviews but also found some worse reviews. The bad reviews seem to focus on fit and finish. BSA guarantees it will shoot 1" groupings.
Once I get it I need to build another AR lower (I have 4 pre-ban left in my stash). I will use my Hera furniture. Debating to get a match style drop-in trigger. I have a couple AR lower build kits and never had an issue with standard triggers.
BTW: They don't charge tax or shipping so the price shown is the price you pay.
Since this is a long-range shooter I probably don't need backup iron sights but I have a set on the shelf. Who uses backup sights? Is it worth throwing them on?
BC-15 | 6.5 Grendel Upper | 20” 416R SS Straight Fluted Heavy Barrel | 1:8 Twist | Rifle Length Gas System | 15” MLOK
Shop BCA 6.5 Grendel Complete Uppers! All BCA grendels are type II and this upper features a stainless straight fluted barrel and the new handguard. You can't go wrong with BCA!www.bearcreekarsenal.com
Yes, with an M Lok adaptor.Can I put a bipod on this upper?
BC-15 | 6.5 Grendel Upper | 20" 416R SS Heavy Barrel | 1:8 Twist | Rifle Length Gas System | 15" MLOK
Grab this high quality BCA AR-15 Complete Upper Assembly: 20" 416R Stainless Steel Heavy Barrel, 6.5 Grendel Type II, 1:8 twist w/ 15" MLOK featuring the new handguard to give you the best accuracy around!www.bearcreekarsenal.com
Yes, with an M Lok adaptor.
Caldwells have worked for me and they're not $$$Ah ok I'm dumb lol. I saw mlok but didn't realize that entire shroud has it on every side. Any suggestions for a bipod? So many out there.
Caldwells have worked for me and they're not $$$
Caldwells have worked for me and they're not $$$
You don't need to buy mags, only mag followers. Swap them out for the standard AR 15 5.56 mag followers. Something like these:
(3) Pack 6.5 Grendel Anti-Tilt Followers
Our AR-15/M4/M16 followers are designed to not only look great, but give you even better performance. PTFE gives these followers a very strong coating that helps with lubricity and ensures a long lasting product. These are designed for use in ASC 6.5 Grendel magazines.www.ammosc.com
For almost twice as much, you can buy an Aero M4E1 Enhanced upper, but that doesn't come with a BCG nor a charging handle, so add another $200+ for those:
Aero Precision 20" 6.5 Grendel M4E1 Enhanced Complete Upper Assembly
Founded by a veteran, Wing Tactical finds the best tactical gun parts and accessories for AR-15s, Glocks, and other firearms so that you don’t have to.www.wingtactical.com
Aero Precision 6.5 Grendel/6mm ARC Bolt Carrier Group
Founded by a veteran, Wing Tactical finds the best tactical gun parts and accessories for AR-15s, Glocks, and other firearms so that you don’t have to.www.wingtactical.com
Seekins Precision DNA Charging Handle
Founded by a veteran, Wing Tactical finds the best tactical gun parts and accessories for AR-15s, Glocks, and other firearms so that you don’t have to.www.wingtactical.com
You'd end up with a solid upper with the Aero, but you'll pay a premium price too.
Side charging uppers are fine when they are reciprocting(charging handle isn't attached to the bolt carrier). When the charging handle is attached to the bolt carrier, they move with the bolt during firing. The problem is, in order to remove the bolt carrier for any reason, you will need to remove the handle with a tool. They also require a 'customized' bolt carrier that allows the mounting of said charging handle. So in the event you need to swap out the BCG if you are chasing down a problem or something, you can't just throw any ol' BCG into it.
I haven't tried them. I don't own a Grendel. They are supposed to work in steel mags. IDKI got these anti-tilt followers and tried them in 3 different AR magazines and they do not fit out of the box. I can see where I need to grind/file a bit down to make them fit. Is that what you had to do? I did manage to get them in 1 magazine and it was super tight no way it was going to work. I tried them on an original Colt magazine and 2 other 30 rounders. All were metal. I didn't try them in my Magpul composite mags maybe they fit in those better out of the box.
I haven't tried them. I don't own a Grendel. They are supposed to work in steel mags. IDK