Hi,
Have an anschutz 54 that needs fitting into a 90% complete BR stock. Inletting, pillars etc
Not looking to diy this one.
Any recommendations appreciated.
Thanks in advance
the bushings work great for neck tension. What about concentricity? Some of the brass are dinged in a bit from firing. After sizing still evident. Non issue or not? Loading for benchrest.
Thanks in advance
Case length is 1.515. Trim length is 1.505. I have factory loaded Sako cartridges @ 1.515 - can’t close bolt on them. Norma fits - measures at 1.505. What to do? Take bullets out of Sako, trim case and reload? Rifle is a Sako- odd they do not fit. Don’t want to force anything for all the...
Want to reload 223 cases. Spent primer measures .170, appears to be surrounded by metal ring in the primer pocket to fit. Regular.175 primer does not fit. What’s going on? Don’t know if ring is removable. Pictures attached. Thanks in advance.
Just started reading it. Does it mention anything about primers to be used with their recommended loads? Hornady specifies primers, not seeing it here. Am I missing something? Basically looking to load 223 and 308 with Varget.
Round goes in chamber bolt won’t close.
Appears extractor catches halfway on rim of cartridge. Bolt will close if I push cartridge under extractor. I’ve heard people say to bend extractor out. Or lightly file extractor? Thoughts? The rifle is used, appears to never have been fired.
Thanks in...
Have a Miroku over/under, similar to early Citori. In the action there is a rod - trying to determine purpose- ejector v extractor ? Picture attached. Reason I am curious is bottom barrel extracts, top ejects, wondering if I can change this.
Thanks in advance
Someone (who shall remain nameless), put an omegagunlock in a BPS incorrectly. This is a plug you put in the chamber and tighten so shells cannot be inserted. Problem is there is a lipped portion that should be placed away from the extractor. If you place it facing the extractor- you get...
Someone (who shall remain nameless), put an omegagunlock in a BPS incorrectly. This is a plug you put in the chamber and tighten so shells cannot be inserted. Problem is there is a lipped portion that should be placed away from the extractor. If you place it facing the extractor- you get...